Who are the owners of Rogers Brothers silverware?
The various Rogers and Rogers Brothers silverware companies were bought up around the same time by two main silver-plate manufacturers, International Silver and Oneida, but the individual companies continued to use their own marks for some patterns. Most of the flatware produced was less expensive silver-plate.
How do you know if you have original WM Rogers silverware?
One of the simplest ways is to look for the word Sterling stamped on the bottom. If it’s not stamped somewhere, it is either silver plate or some other fake. My background says that it is about 99 % sure that Wm. Rogers is silver plate.
How to tell real silver from Silverplate when it is Oneida?
Sometimes the same pattern (design) will be offered in both sterling and plate, but it will say on the piece or sticker (hah!). A cheap way to try and ID your silver is to visit Replacements.com who has an assortment of silver patterns, not just Oneida and William A. Rogers but some you never probably ever heard of.
What does triple pl stand for on WM Rogers silverware?
If the back is marked Rogers, most Rogers are silverplate, no matter what else it is marked. Sometimes it has the pattern name, or Triple Pl It stands for “International Silver,” a cartel of silverware manufacturers formed in 1898 by 14 silver producers, the largest of which were Holmes and Edwards, Meriden Britannia, and Rogers Brothers..
What kind of serving fork does Rogers Oneida use?
Vintage Silver Plated WM A Rogers Oneida LTD. Silversmiths Tea Set WM. A Rogers Flatware FENTON Pattern, Vintage Stainless Steel Serving Fork, WM.A Rogers Stainless Oneida Ltd, Vintage Oneida Fenton (RG32)
What does the A1 mean on 1881 Rogers flatware?
Most 1881 Rogers patterns will have a backstamp of “1881 Rogers A1.” This mark indicates the pieces are silverplate. The A1 designation means that plating a gross of teaspoons took 2 ounces of silver. Even though this designation is in terms of teaspoons, this rating applies to all flatware, not just the 1881 Rogers Oneida Ltd. spoon.
What kind of silverware does WM Rogers use?
Vintage Wm. Rogers/oneida Dwt 12 6 Fork/6 Knife Set. Beatiful Set Set Of 3 Oneida Community Tudor Silverplate Queen Bess Dinner Forks No Mono. .
What is the value of 1881 Rogers silverware?
The value of used 1881 Rogers silverware depends strongly on the condition of the item. Unlike coins, there is not a standard grading system. You should look for bent or damaged cutlery, worn silverplate, and monograms. Monograms decrease the collectibility of 1881 Rogers Oneida silverware.
What does the is stand for on Rogers silverware?
It stands for “International Silver,” a cartel of silverware manufacturers formed in 1898 by 14 silver producers, the largest of which were Holmes and Edwards, Meriden Britannia, and Rogers Brothers.. The IS marking does not give any indication about the purity or value of the silver.
How to tell if WM Rogers is is plate or sterling?
If the back is marked Rogers, most Rogers are silverplate, no matter what else it is marked. Sometimes it has the pattern name, or Triple Plate, or A-1. These are all silverplated flatware or silverware.
Where can I find list of Silverplate marks?
FLATWARE PATTERNS GORHAM HOLMES & EDWARDS INTERNATIONAL SILVER CO KIRK STIEFF CORPORATION ONEIDA SILVERSMITHS REED & BARTON 1847 ROGERS BROS TOWLE MFG CO WALLACE SILVERSMITHS INC. Founded in 1892 by Charles M. Robbins. In 1912 Robbins Company (The Robbins Co) was formed and in 1963 became a subsidiary of Continental Communications Corporation.
How do you determine the value of Rogers Brothers silverware?
Online auction sites, sell-by-owner sites, antiques dealers and silverware resellers are good sources for valuing Rogers Brothers silverware. Complete sets in excellent condition in their original hardwood chests command the best prices.
Is it possible to date Rogers silverware?
Rogers Bros. silverware is highly sought after by antique silver collectors and aficionados. Like any antique silverware, dating and authenticating Rogers Bros. silver is challenging if you don’t know what to look for.
Who was the founder of Rogers flatware company?
Manufacturer of silverplated flatware in the building of Holmes Booth & Hayden. The president was Charles Alfred Hamilton, while William H. Rogers (not a silversmith) was only a stockholder. The firm was one of the original companies to become part of International Silver Co. in 1898
Who are the owners of the Rogers silver plate?
Many companies used marks with the name Rogers in it. Many of these marks ended up being owned by two major companies International Silver Company and Oneida. Before that many of these marks were owned by a variety of companies and were bought and sold through a variety of business cycles. List of Companies with Rogers in the name.
The various Rogers and Rogers Brothers silverware companies were bought up around the same time by two main silver-plate manufacturers, International Silver and Oneida, but the individual companies continued to use their own marks for some patterns. Most of the flatware produced was less expensive silver-plate.
How many pieces of sterling silver are in WM Rogers Silver?
Miscellaneous Sterling Silver This 344. Miscellaneous Sterling Silver This box contains total of 36 pieces. 9-1/4″ serving spoon marked “pat sept 8-14″, 8-7/8” serving spoon marked “R.C. Wm. A. Rogers silver plate rectangular shape Wm. A. Rogers silver plate rectangular shape galley tray with rolled lip edge and a floral scroll engraving.
How big is the wm.a.rogers silver tray?
Wm. A. Rogers silver plate rectangular shape Wm. A. Rogers silver plate rectangular shape galley tray with rolled lip edge and a floral scroll engraving. Measures 1 1/2″ high by 19 3/4″ long by 11
What kind of silver Shaker does WM Rogers use?
ROGERS SILVER PLATED COCKTAIL SHAKER, having screw cap on spout, ornate accented handle. 12 in. H. Marked with the Silversmith’s trademark underfoot. 227. Sterling Silver Candelabra By Wm. Rogers 227.
How to identify a WM Rogers silver plate?
Wm Rogers Silver Marks One of the fastest and easiest ways to determine if a piece of silver was crafted or designed by William Rogers is to look for Wm Rogers silver marks. American sterling silver markings contain the mark of the manufacturer or silversmith.
What does the number 925 mean on Rogers silverware?
An additional “IS” mark after the Rogers name on the backs of spoons and forks stands for International Sterling. Real sterling silver is marked with the word “STERLING” or the number 925, for the 92.5 percentage of silver required for the sterling designation.
When did WM Rogers become part of International Silver Co?
Starting in 1862, portions of the Rogers brothers’ enterprises were taken over by the Meriden Britannia Co., which, in 1898, became part of the newly formed International Silver Co.. Rogers and his brothers were associated with Meriden Britannia Co. until his death.
When did Oneida start making silver flatware?
As of 1899, Oneida began to produce silver-plated flatware and hollowware. From 1929 onward, Oneida applied its “Wm. A. Rogers” and “1881 Rogers” brands—that the former acquired that year—to manufacture product lines of lesser quality.
When did the Oneida Community Plate come out?
The mark “Community Plate” dates back to 1899, Oneida Community’s foray into the production of silver-plated holloware and flatware. The “Wm. A. Rogers” and “1881 Rogers” brand-names, as of 1929, were wholly-owned and employed by Oneida. Oneida also owns the brands of Buffalo, Sant’Andrea, and Schonwald.
How many pieces of silver plate does Oneida have?
100 PIECES! Vintage Oneida Community Plate Coronation Flatware Set Silverplate Coronation 1936 ~ 2 – 4 pc DINNER sz. SETTINGS ~ Community Silverplate ~ NICE
Wm Rogers Silver Marks One of the fastest and easiest ways to determine if a piece of silver was crafted or designed by William Rogers is to look for Wm Rogers silver marks. American sterling silver markings contain the mark of the manufacturer or silversmith.
