What is 5/8 on a tape measure?

What is 5/8 on a tape measure?

Hear this out loudPauseFive-eighths inch or 5/8 inch on a ruler is a mark located between 1/2 inch and 1 inch. When the ruler divides the inches into eighths, 5/8 inch is the fifth mark on the ruler from the left side. If the ruler divides the inches into 16ths, then 5/8 inch is the 10th mark.

What is 1/4 as a measurement?

Dry/Weight Measure

What is 1/8th of an inch?

Remember that two sixteenths of an inch equals one eighth, two eighths of an inch equals one quarter, and 2 quarters equals one half. For example, the second eighth-inch marking after the inch marking is a quarter inch….What does an eighth of an inch look like?

What is 5/8 as a percentage?

62.5%
Hear this out loudPauseAnswer: 5 out of 8 can be expressed as 62.5%. Let us understand the conversion of a fraction to a percentage. To convert a fraction to a percentage, we multiply the given fraction by 100 and add a % symbol to it.

How do you measure 1/8 on a ruler?

Hear this out loudPauseThe 1/8 of an inch marks are the smaller marks found directly in between the 1/4 of an inch marks on the ruler. Between 0 and 1 inch, there are marks that denote 1/8, 1/4 (or 2/8), 3/8, 1/2 (or 4/8), 5/8, 6/8 (or 3/4), 7/8, and 1 (or 8/8) of an inch. In total, there are 96 of these marks on a 12 inch ruler.

How do you measure 1/8 of a teaspoon?

Hear this out loudPause1/8 teaspoon = 1 squeeze between thumb, file and center fingers. 1/4 teaspoon = 2 squeezes between thumb, file and center fingers. 1/2 teaspoon = Cup your hand, pour a quarter measured sum in your palm.

What is 5/8 in a whole number?

Hear this out loudPauseThe fraction 5/8 can never be a whole number because it represents part of a whole. The whole is divided into 8 pieces, and the fraction 5/8…

What is 5/8 as a fraction?

Decimal and Fraction Conversion Chart

What does the term 5 by 5 mean?

has excellent strength and perfect clarity
Hear this out loudPauseTherefore 5 by 5 means the signal has excellent strength and perfect clarity – the most understandable signal possible. Five by five is the predecessor to the term “Loud and Clear” or “Lima/Charlie” used by military units today.

Does 4 tablespoons equal a 1/4 cup?

Hear this out loudPause1/4 cup = 4 tablespoons. 1/6 cup = 2 tablespoons plus 2 teaspoons. 1/8 cup = 2 tablespoons. 1/16 cup = 1 tablespoon.

Five-eighths inch or 5/8 inch on a ruler is a mark located between 1/2 inch and 1 inch. When the ruler divides the inches into eighths, 5/8 inch is the fifth mark on the ruler from the left side. If the ruler divides the inches into 16ths, then 5/8 inch is the 10th mark.

What is 1/8 on a measuring stick?

The 1/8-inch mark is located between any two 1/4-inch marks. Most work tends to stop at this point, though in some cases you will need to measure down to the 1/16-inch mark. The 1/16-inch mark is the absolute shortest line on the tape measure.

What does 1/8 of an inch look like on a tape measure?

Remember that two sixteenths of an inch equals one eighth, two eighths of an inch equals one quarter, and 2 quarters equals one half. For example, the second eighth-inch marking after the inch marking is a quarter inch….What does an eighth of an inch look like?

What is a quarter on a tape measure?

Most standard tape measures in the U.S. have markings that measure down to 1/16 of an inch. On some tapes, quarter inch marks are the same size as eighth-inch marks. Remember that two sixteenths of an inch equals one eighth, two eighths of an inch equals one quarter, and 2 quarters equals one half.

What is .375 as a fraction?

3 / 8
Answer: 0.375 expressed as a fraction in simplest form is equal to 3 / 8. Let’s look into the solution in detail. Explanation: 0.375 has three numbers after the decimal so, we will multiply and divide 0.375 by 1000.

What are the standard sheet metal gauge sizes?

Since no. 1 had already been established, no. 0 (one aught), 00 (two aught), etc. came into play. Table 1 below summarizes the most common sheet metal sizes for aluminum, standard sheet steel, stainless steel, and galvanized steel. Weight per square foot of material is also provided.

How to calculate the weight of a metal?

Calculating the weight of any type of metal product: beams, profiles of various types, bars, tubes, pipes, sheets, etc. is similar to that of any other type of material. We need to know the volume of the metal (cu in, cu mm, cu cm, etc.) and its density (usually in g/cm 3, oz/in 3). Multiplying the two gives us the resulting metal weight.

Where can I find a metals reference guide?

METALS REFERENCE GUIDE The following pages rep- resent sizes, weights, and dimensions of carbon steel, stainless steel and alumi- num available from stock. With one of the largest non-mill inventories in the U.S.A., stocked in six service centers, we have what your project requires.

How to calculate the weight of a mild steel sheet?

The formula to work out the weight in Kg’s of a mild steel sheet or plate: Example: 2500 x 1250 x 5mm Formula: 2.5 x 1.25 x 5 x 7.856 (g/cm3) = 122.75 Kg’s For guide purposes only,a formula that takes into consideration the plus tolerances used when producing mild steel sheet or plate:

Since no. 1 had already been established, no. 0 (one aught), 00 (two aught), etc. came into play. Table 1 below summarizes the most common sheet metal sizes for aluminum, standard sheet steel, stainless steel, and galvanized steel. Weight per square foot of material is also provided.

What are the different thicknesses of sheet metal?

Below you will find a chart for metal thicknesses and weights. Commonly used metals for manufacturing at our shop are: Aluminum: 0.025″, 0.032″, 0.040″, 0.050″, 0.063″, 0.080″, 1/8″ (0.125″) and 1/4″ (0.25″). Cold and hot rolled steel: 16 gauge, 14 gauge, 1/8″ and 1/4″.

How to calculate the weight of a piece of steel?

Each (2 Sides Parallel) HEXAGONSide Length x Side Length x.7367 = Lbs. Each (Equal Sides) OCTAGONSide Length x Side Length x 1.3692 = Lbs. Each SIMPLE STEEL WEIGHT FORMULAS Simply enter data indicated (Decimal Inches), move from left to right making computations by factors as sho wn.

What are the gauges for metal gutters and roofing?

Steel for metal roofing and gutters: 24 gauge. Aluminum for metal roofing: 0.032″ or 0.040″. Aluminum for gutters: 0.027″ or 0.032″ for seamless gutters and any other thickness for custom gutters.