What does floor hole mean?
OSHA defines a floor hole as a gap or open space in a floor, roof, horizontal walking-working surface, or similar surface that is at least 2 inches (5 cm) in its least dimension. Examples of Floor Holes: Roof drains.
What is a hole in the floor called?
Aperture. 1. An opening, such as a hole or gap.
What does OSHA consider a floor hole?
Floor hole: an opening measuring less than 12 inches but more than 1 inch in its least dimension, in any floor, platform, pavement, or yard, through which materials but not persons may fall; such as a belt hole, pipe opening or slot opening.
What protection should you place if there is a hole on the floor?
guardrail system
When a hole is not in use, always ensure it is protected by a cover or a guardrail system that is erected along all unprotected sides of the hole. Floor holes or openings must be protected to prevent workers from tripping and/or falling into them.
What is the difference between a hole and an opening?
As nouns the difference between opening and hole is that opening is an act or instance of making or becoming open while hole is a hollow spot in a surface.
What does full of holes mean?
Unsound or flawed; having many faults that do not stand up to scrutiny or criticism. Alludes to a leaky, porous vessel—hence the related expression, “doesn’t hold water.” Does anyone have a better suggestion? Mark’s idea is clearly full of holes.
How do you repair a hole in a tile floor?
Pack large chips or holes in your tile floor with ceramic filler, blending colors as necessary to make an inconspicuous patch job. When dry, sand smooth and protect with a coat of lacquer. Cracked tile. Use siliconized caulk to fill in tile floor cracks.
At what diameter must floor holes be covered?
Every floor hole into which persons cannot accidentally walk (on account of fixed machinery, equipment, or walls) shall be protected by a cover that leaves no openings more than one (1) inch wide. The cover shall be securely held in place to prevent tools or materials from falling through.
What is the difference between a hole and an opening OSHA?
So according to OSHA, not only is the location of a hole different than an opening (walking surface vs. wall), but so is the physical size of the void into which – or through – a worker may fall.
Are holes openings?
The difference between Hole and Opening. When used as nouns, hole means a hollow place or cavity, whereas opening means an act or instance of making or becoming open.
What is considered an open hole?
And according to OSHA regulation 1926.500 (b), an “opening” is: “…a gap or void 30 inches (76 cm) or more high and 18 inches (48 cm) or more wide, in a wall or partition, through which employees can fall to a lower level.”
What is full of holes but still holes water?
Riddle: What is full of holes but still holds water? The answer is: A Sponge.
Whats full of holes but can hold water?
So, what is full of holes but still holds water? The answer is a sponge!
Can you repair tile floors?
Tile repairs are very simple, because only the affected tiles must be repaired. If a tile is loose, it can be reglued with floor tile adhesive; if it’s just loose at one edge or corner, there may be enough old adhesive left on the tile to reattach it. Cover the tile with aluminum foil, and then with a clean cloth.
What are the requirements for hole protection?
First, §1926.501(b)(4)(i) requires that employees be protected from falling through holes more than 6 feet by fall arrest systems, guardrails or covers. So, if a hole is more than 6 feet deep, one of these protection systems must be used.
