How many amps does a laundry dryer use?
Depending on the incoming voltage and temperature, the draw is variable. It is recommended that the breaker size be 30 Amps. The dryer is going to be able to pull 25 Amps.
How much power does a gas dryer need?
The manufacturer tells you how much energy the dryer will need. A gas dryer typically uses between 20,000 and 25,000 BTU (or . 2 to . 25 therms) per hour, while an electric dryer typically uses between five and seven kilowatts per hour (kWh).
Can I use a 20 amp breaker for a dryer?
Your laundry room needs a dedicated 20-amp circuit, according to the National Electrical Code, and it can service both the washing machine and a gas dryer. Because the circuit is connected to a 20-amp breaker, you must wire it with 3-wire, 12-gauge cable.
What size breaker do you need for a dryer?
30 amps
The NEC requires that dryers have a dedicated circuit with a minimum of 30 amps. This calls for a 30-amp, double-pole breaker wired with 10 AWG wire.
Are dryers 30 or 50 amps?
An electric dryer requires less amperage than an electric range. Electric range cords are rated at 50 Amps and dryer cords are rated at 30 Amps.
What size breaker do I need for a dryer?
The NEC requires that dryers have a dedicated circuit with a minimum of 30 amps. This calls for a 30-amp, double-pole breaker wired with 10 AWG wire.
What size wire should be used for a dryer?
Clothes dryers require a relatively thick wire to accommodate their 30 amp circuit. The minimum recommended wire size for clothes dryer circuits is 10 gauge. However, amperage decreases over distance, so appliance manufacturers advise a larger wire gauge for circuits that extend beyond a distance from their source.
Can I plug a 30 amp dryer into a 50 amp outlet?
If this question can be reworded to: can I safely power an electric dryer that is rated at 30 amps on an outlet, wiring, and circuit breaker rated for 50 amps, the answer is YES.
