How do you treat raw wood indoors?

Prepare the surface.

Check for knots.
Lightly sand entire piece with palm sander or hand sander.
Take linen cloth and wipe piece.
Wipe with “tac” cloth (a cheese cloth with a tacky texture).
Apply coat of wood conditioner.
Rub the piece with emory cloth, which is a fine sand paper, or steel wool.
Wipe again with tac cloth.

What’s the best way to restore an old table?

Removing the buildup can reveal a nice finish underneath, so a good cleaning and buffing may be all that old table needs to look new again. Give the furniture a thorough scrub with a sponge and some vegetable-based oil soap and warm water. For detailed pieces, use a soft toothbrush to get into the nooks and crannies.

What’s the best way to restore antique furniture?

Some of these methods are used by our restorers when cleaning our quality pieces before they go up for sale. Antique furniture should always have the original finish preserved and the best way to do this is by using a wax finish as it is very easy to apply, it will clean any old dirt and keep the finish on your antique furniture looking attractive.

What’s the best way to clean a kitchen table?

Use a soft cloth (e.g., cotton) and lightly rub the the surface to remove the grime. Use only enough soapy water to wet the surface without flooding it. Rotate the cloth frequently to avoid spreading the dirt it absorbs.

What’s the difference between a broken table and a restored table?

There’s a big difference between an antique dining table with a sun-faded surface and a piece with broken or missing legs and severe water damage. Restoration is all about bringing a piece back to its former glory, but sometimes the extent of the damage dictates whether you should undertake this effort.

What’s the best way to clean an antique table?

The first step to cleaning antique wood furniture is to gently remove any dust that has built up on its surfaces. To avoid scratching the wood, use a vacuum cleaner with a soft brush attachment for hard-to-reach surfaces or crevices, such as the table and chair legs, or simply use a hand-held soft brush or very soft cloth for the larger surfaces.

Do you need to clean antique wood furniture?

However, if the finish is intact or only slightly worn, the pieces likely only need to be cleaned to remove dirt and stains. The first step to cleaning antique wood furniture is to gently remove any dust that has built up on its surfaces.

What should I wear to restore an antique dining table?

You also need to lay down an old rag beneath the antique table to protect the floor from any drippings. Remember to always wear safety glasses and rubber gloves to protect yourself.