How do you fix timber battens in concrete?

How do you fix timber battens in concrete?

If you don’t, the most popular way is to fix softwood battens by screwing and plugging them to the concrete floor. The concrete surface should be sound and completely dry, lay polythene DPM (Damp Proof Membrane) underneath the battens. This acts as a vapour barrier to prevent possible moisture entering the boards.

How do you fix timber on concrete?

To install them, position the wood part in place. Drill a clearance hole through the wood and into the concrete using a masonry drill. This is usually a much easier job than driving nails by hand. The shear strength is much higher, too — about two to four times as much, depending on diameter and length.

Can you lay timber flooring on concrete?

Solid strip timber flooring can be fixed direct to joists, to sheet subfloors of particleboard or plywood over joists, plywood or battens over concrete slabs and in some locations, direct fixing to the concrete slab is common. Prefinished solid timber floors are usually installed as an overlay floor.

How do you attach wood battens to concrete?

Battens are attached to the floor by drilling a pilot hole through the batten and concrete, and attaching a frame fixing.

1. Cut the battens to fit the room.
2. Lay the first batten down on one of the perimeter walls.
3. Put a masonry bit into your drill that is the same width as the frame fixings.

How do you increase the height of a concrete wall?

Increase Block Wall Height

1. Remove the column caps.
2. Drill into the existing wall and epoxy in 1/2″ rebar every 8″ to a height of 1″ shorter than the desired height of the finished wall.
3. Mortar the first layer of blocks into place.
4. Fill the blocks with concrete.
5. Mortar the second layer of blocks into place where needed.

How do you nail a concrete wall?

Drill a pilot hole into the concrete wall, using a drill and masonry bit. The hole should be the same size in diameter as the masonry nail anchor. Insert the anchor into the hole so the top rim is flush with the surface of the wall. Hammer the nail into the anchor.

Can you glue timber to concrete?

Selleys Liquid Nails Timberflex is a flexible, trowel grade adhesive suitable for most types of solid, engineered strip and sheet timber flooring to concrete and timber. The Advanced Polymer Technology formulation contains no isocyanate.