How do I get the sound back on my Sonos?

How do I get the sound back on my Sonos?

You can go into sonos app and choose TV or you can power cycle your TV so that it loses signal to playbar and gets signal back (initiating an autoplay of the TV).

How do I troubleshoot my Sonos speaker?

Common fixes

1. Check the power to your Sonos product. Make sure the power cord is securely plugged in to both the Sonos product and the power outlet.
2. Unplug your router, then plug it back in. Give the router a minute or two to start up again.
3. Make sure you’re connected to the right Wi-Fi network.

Why does my Sonos suddenly stop playing?

Audio stops or skips can occur if a Sonos product has a weak wireless connection to your router or the nearest wired Sonos product. If you are in a wireless setup, move any affected Sonos products closer to the router.

How do I unmute my Sonos?

To mute/unmute this Sonos component: Press the Mute button to mute or unmute. To mute/unmute all Sonos components: Press and hold the Mutebutton for 3 seconds to mute all Sonos components in your household. Press and hold for 3 seconds to unmute all. Press these buttons to adjust the volume up and down.

How do I connect my Sonos speakers to my TV?

Information

1. Open the Sonos app for iOS or Android. From the Settings tab, tap System.
2. Select the room where your Sonos home theater product is located.
3. Tap TV and then Remote Control Setup.
4. Follow the in-app instructions to configure your new remote to control the home theater speaker.

Does Sonos need to be plugged into router?

Thanks to a software update, you no longer need any wired connection to your router. Instead, you can set up and run Sonos speakers on your regular Wi-Fi network, as long as they’re within range of the router.

How do I sync my Sonos to my Samsung TV?

1. Press the Home button on your remote.
2. Toggle to the left, and select Source.
3. Select New Device.
4. Select Home Theater System.
5. Type Sonos in the search box and select it.
6. Select Optical for the input.
7. Select Power Test to begin the testing process.
8. Select Yes when asked if the test completed successfully.

How do I make my Sonos flash green?

Unplug the power cord from the wall. Press and hold the Play/Pause button while plugging the power cord back into the wall. Hold the button until the light flashes amber and white. Once the factory reset is complete, the light will flash green.