How big is the mainspring on a clock?
Let’s take a look at what actually causes a clock to quit running or chiming after winding it up… A clock mainspring is made of spring steel and is about the width of a ruler (but not quite as thick). They are on average 7 to 8 feet long! One end of the mainspring hooks on a winding arbor (the thing your key goes onto when you wind it).
Is the winding of a clock for You?
Many owners of mechanical time pieces find that winding a clock is a special and enjoyable part of their routine. Is it for you? Maybe you have owned a clock for years and have wound it hundreds of times. You may have inherited a clock from your parents or grandparents who warned you not to over-wind it.
Why is the mainspring on my clock not working?
Over the years, the grease will become dry and sticky, and the mainspring may become rusty or corroded. These factors cause friction in the movement of the spring coils. Eventually the spring becomes so dry and gummy that is can’t release anymore, or the spring metal becomes worn out and corroded and may break! How do we fix it?
What causes the mainspring on a clock to become rusty?
Over the years, the grease will become dry and sticky, and the mainspring may become rusty or corroded. These factors cause friction in the movement of the spring coils.
Who was the father of Howard Miller clocks?
Howard Miller was schooled in the fine art of clockmaking by his father, Herman, in the Black Forest region of Germany. Howard developed into a visionary whose keen sense of innovation spawned a tradition of excellence that has been uncompromised through three generations.
Can a pendulum clock be removed from the wall?
TIP – Prevention: for wall clocks, always remove your pendulum before taking the clock off the wall. If the pendulum stays in the clock it may scratch the inside of the case as well as change the beat and then the clock may not work. Check The “Beat”: Listen to the tick-tock on the clock and see if it is nice, even tick-tock.
Where does the movement of a clock come from?
The exquisite movement in many clocks we offer is made by Old World craftsmen employed by the Kieninger Company of Germany.
What kind of finish do Howard Miller clocks use?
Cherry Bordeaux finish on select hardwoods and veneers is lightly distressed. Hinged, top door offers easy access for winding of the clock movement. The dial and case are illuminated, with an easy to reach roller switch on the back. The tapered base features a decorative cutout.
