What does 1 cubic metre of soil weigh?

What does 1 cubic metre of soil weigh?

1.3- 1.7 tonnes
One cubic metre of moderately damp soil (as freshly dug) soil weighs 1.3- 1.7 tonnes when dug, depending on how tightly packed it is. It should be noted that blended topsoil may be less dense and therefore closer to 900 litres or even 1 cubic metre to the tonne.

How many cubic meters are in a bulk bag of type 1?

One bulk bag will cover approximately 8 square metres (coverage is calculated assuming a depth of 50mm). Also called “dumpy bags” or “bulk bags”, the most common size can hold about 0.7 cubic metres of logs which, being less dense than sand or gravel, will weigh considerably less than a ton. Weights of materials.

What does 1 cubic meter of stone weigh?

Stone, common generic weighs 2.515 gram per cubic centimeter or 2 515 kilogram per cubic meter, i.e. density of stone, common generic is equal to 2 515 kg/m³.

How many tonnes of stone are in a m3?

Tonnage can be derived from volume. Volume is calculated in m3 (length x width x depth). 1 m3 = 1.5t – 2.2t of crushed stone depending on the grading and degree of compaction.

How much does 1 cubic meter road base weigh?

Product Tonnes / Metre

How much does a jumbo bag of type 1 cover?

Simply Paving Building Materials MOT Type 1 One bulk bag will cover approximately 8 square metres (coverage is calculated assuming a depth of 50mm).

How many 20kg bags of road base are in a cubic meter?

* 108 x 20kg bags of Boral Cement Concrete Mix will fill 1 cubic metre (m3).

What area does a bulk bag of type 1 cover?

approximately 8 square metres
Simply Paving Building Materials MOT Type 1 One bulk bag will cover approximately 8 square metres (coverage is calculated assuming a depth of 50mm). Building materials are delivered usually on the same day as your patio/driveway products and are provided by a Simply Paving contracted merchant from your area.

What weight is a bulk bag of type 1?

Sometimes refered to as DOT type 1, it is used for a sub-base for roadways, car parks, footpaths, driveways, hard standings and building bases. Nominal Weight: 875kg….Specifications.

How do you calculate m3 to tonnes?

The cubic meters amount 0.42 m^3 converts into 1 t, one tonne(Metric). It is the EQUAL concrete mass value of 1 tonne (Metric) but in the cubic meters volume unit alternative. so just multiply m^3 amount by 2.41(up to 2 decimals).