Why is my directv not connecting to my TV?

Reset your receiver Press the red reset button which is located on the side of most DIRECTV receivers or inside the access card door on the front panel. Wait for your receiver to reboot. If your receiver doesn’t have a red reset button: Unplug the receiver’s power cord from the electrical outlet.

How do I put my genie in pairing mode?

Pair the Wireless Genie Mini with your Genie HD DVR

Press MENU on your Genie remote.
Select Settings > Whole-Home > Manage Client > Add Clients.
Write down the PIN you see on the screen.
Go back to the TV where you connected the Wireless Genie Mini.
Use the remote to select Continue and enter the PIN when prompted.

How do I connect my wireless directv box?

Connect a receiver to a wireless network

Check that the router does not have a WPS logo.
Connect the Wireless DIRECTV CINEMA Connection Kit device to the receiver.
Use the DIRECTV remote control to select Set Up Now on the TV.
Choose your wireless network from the list and select Continue.

How do I reconnect my DIRECTV remote to my receiver?

Make sure your remote is paired with your receiver.

Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
Press and hold MUTE and ENTER at the same time on your remote.
The screen displays Applying IR/RF Setup. The remote is synced.

How do I reconnect my DIRECTV Genie?

Connect the Genie HD DVR using Wi-Fi Protected Setup (WPS) Press MENU on your remote. Select Settings > Network Setup > Connect Now. If you’re reconnecting to the Internet, select Reconnect Now. After the system checks the connection status, select Set Up Wireless.

What causes TV no signal?

The signal being received may be weak. If using an over-the-air antenna, make sure the coaxial cable connection is secure and don’t use a signal splitter. The antenna may need to be adjusted to improve the signal quality. If using cable or satellite, make sure the connection to the back of the TV is secure.