Why is my TaoTronics sound bar not working?

Please unplug and plug the charging adapter and re-start the soundbar to have a try. Unplug and re-plug the soundbars power adapter and test. Test using a different wall outlet. If the above does not solve the issue, TaoTronics can send out a replacement power adapter to get the unit working again.

Are TaoTronics soundbars any good?

The TaoTronics TT-SK023 is a poor soundbar for most uses. While its compact design is practical, it has a dull, boxy sound profile that lends itself poorly to not only movies, but TV shows and music too. The soundstage is also quite small and there are no virtual surround effects to help with this.

How do I turn on my TaoTronics speaker?

Read the safety instructions!

Turn the TaoTronics Mini (TT-SK03) speaker on by pressing the Power button for approx 2 seconds and ensure that the battery fully charged.
Once switched on, the loudspeaker is automatically set to the pairing mode and can be paired with other Bluetooth enabled devices.

How do I reset my TaoTronics speaker?

In order to perform a “factory reset“, simply press the multi function button for approx 5 seconds until the red LED flashes once. The speaker is now reset and can be paired with a new device. Do not forget to remove the TaoTronics TT-SK09 speaker from your Bluetooth device list on your mobile device.

How do you install a TaoTronics sound bar?

How to Set up the TaoTronics Sound Bar

Connect to a 5V / 1A power source.
Plug in the 3.5mm audio cable into the audio output of your device. Connect the green jack to the audio and pink to the microphone output.
Make sure the music is at audile level and tune the volume through the Volume Knob.

How do you put a TaoTronics speaker in pairing mode?

Press and hold the Power Button for 5 seconds (LED indicator ﬂashes blue slowly) and tap twice to enter pairing mode (LED indicator flashes red and blue alternately). After approximately 30 seconds, the pairing will be done (LED indicator in solid blue).