How do I setup my Sony SRS HG1?

How do I setup my Sony SRS HG1?

Press and hold the (power)/ PAIRING button of the speaker until beeps are heard. The BLUETOOTH indicator begins to flash quickly, and the speaker enters the pairing mode. Tap [h. ear go (SRS-HG1)] on the SongPal screen of your smartphone.

How do I setup my Sony personal audio system?

Press and hold the (power) – PAIRING button until you hear the voice guidance and the ( Bluetooth ) indicator begins to flash quickly. The speaker enters pairing mode. Perform the pairing procedure on the Bluetooth source device to detect the speaker.

Why isn’t my Sony speaker pairing?

If the speaker device information is registered to your Bluetooth® source device, delete the information, and then perform the pairing procedure again. Delete the speaker information from your Bluetooth device. Connect the speaker to a Wi-Fi® network. button to set it to Bluetooth pairing mode.

Why can’t I pair my Sony speaker?

Unable to pair the speaker with a BLUETOOTH device Bring the speaker and the BLUETOOTH device to within 1 m (3 ft) of each other. If the (BLUETOOTH) indicator is not flashing quickly in white, press and hold the (power) PAIRING button until you hear beeps and the (BLUETOOTH) indicator begins to flash quickly in white.

How do I connect my Sony speaker to WIFI?

Press and hold the WPS button on the rear of the speaker until a beep sound is heard (for about 3 seconds). The LINK indicator flashes in green. Press the WPS button of the wireless router for more than 3 seconds. Operate within 90 seconds after pressing the WPS button of the speaker.

How do I stop people from connecting to my speakers?

How Do I Stop Someone From Connecting To My Bluetooth Speaker? You can prevent someone from connecting to your Bluetooth speaker by using a security code, buying a more advanced speaker, switching off the speaker when you’re not using it, unpair unwanted devices, update your software, and switch off visibility.

Why is my Sony Bluetooth speaker not connecting to my phone?

Bluetooth May Be Turned Off and the Devices are Too Far Away from Each Other. Press and hold the reset button. Then, go into settings on your device and make sure that Bluetooth is turned on. When the speaker is close enough to the pairing device, the Bluetooth light will flash quickly in white.

How do I sync my Sony speakers?

Pair your speaker with a Bluetooth source device

1. Set your speaker to pairing mode. On your speaker, press and hold the button until the.
2. Turn on the Bluetooth function of the device you want to connect. Mobile devices with Android™ operating system (OS)
3. On your source device, select the model name of your speaker.

How do I put my Sony speaker in pairing mode?

Pairing Your Devices

1. Turn the speaker on. If you turn on the speaker for the first time, the Bluetooth indicator.
2. Set the speaker to pairing mode. To enter pairing mode, press and hold the power or PAIRING button until you hear the voice guidance and the Bluetooth indicator.
3. Pair your source device within 5 minutes.

What is WPS in speaker?

To check if your wireless router is compatible with WPS (Wi-Fi Protected Setup), refer to the operating instructions of your router. Check the following before starting the operation. Disconnect the LAN cable from the speaker. Set the Wi-Fi antenna on the rear in the upright position.

Can’t connect to my Sony Bluetooth speaker?