How do you clean a Maytag Neptune front load washer?

Start With the Inside of the Washer

Start by emptying any laundry.
Proceed by adding a 1/2 cup of chlorine bleach to its compartment.
Run on a normal cycle wash.
Wait until the cycle is complete.
Wipe the drum with a damp cloth dipped in soapy water to remove any oily residues.
Repeat the bleach cycle.

Can you remove the top from washing machine?

Open the lid on the washing machine and place your hand between the drum and the top of the machine. Lift upward and toward you to remove the metal cabinet. If the cabinet does not lift easily, slide it toward the front of the machine, then lift. Be careful not to dent the casing as you take it away from the drum.

Where is the filter on a Maytag front load washing machine?

Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter. Remove the drawer by releasing the tab on each side. With your finger, push down on tab on right side of drawer, and up on tab on left side of drawer.

How do you remove the top of a Miele washing machine?

Service

Remove the screw caps from the lid side edges.
Loosen the lid screws about 4 to 5 turns – max. Do not. completely remove the screws.
Press the screws in to release the retaining tabs. Lift the lid at.

Where is the filter on a Maytag Neptune?

Where is the filter in a Maytag washing machine?

The filter or trap is generally located inside the machine’s agitator. Its function is to capture lint and cast-off fibers. Regular attention to the filter will keep your machine operating in peak condition and prevent a buildup of those unpleasant odors.

Does my Maytag front load washer have a filter?

Some front-loading Maytag washing machines are equipped with a small pump filter at the front base of the machine. This filter may become clogged with debris and lint, encouraging mold and mildew growth and odors. The front panel must be removed and the pump filter cleaned of all debris.