What is difference between sump pump and ejector pump?
The sump pump ejects the water to stop it from accumulating. A sump pump will have no more than a drain pipe that directs the water outside. The ejector pump, on the other hand, will have a direct line to the septic tank or the sewer and also a vent pipe that expels sewer gases to the outside.
Is an ejector pump a sewage pump?
While the sump pump manages groundwater, the ejector pump moves wastewater from basement toilets and greywater from basement sinks, appliances, and floor drains uphill to the main sewer line.
How long do ejector pumps last?
7 to 10 years
While most sewage ejector pumps are designed to withstand at least 7 to 10 years of use, with some even lasting much longer, occasionally problems do arise long before the pump has reached the end of its life span.
Why do ejector pumps fail?
Some common problems that can occur in ejector pump systems are mentioned below: Over the years, the waste collected in tanks deposit a lot of grease. Once the waste reaches a particular level, it signals that the pump needs to empty itself. In the case of its failure, the pump will not do its job.
How often should you change your ejector pump?
A good sewage ejector pump should last at least 7-10 years. However, with proper installation and routine care, your pump can last 30 years or more. A common reason people need to replace their sewage ejector pumps is due to faulty installation where plumbers cut corners or used the wrong sized pumps.
Do ejector pumps require maintenance?
Sewage Ejector Pumps can be expected to operate for years on normal sewage pumping without failing. They give very reliable service and usually requires minimal maintenance work.
Do ejector pumps need maintenance?
An ejector pump is attached to appliances that are below the main sewer line of a city to remove sewage and waste from your home. It’s important to perform routine maintenance on both a sump pump and an ejector pump at least once or twice a year.
Is my ejector pump working?
To verify if the plug is working, you will need to follow the power cord from the ejector pump and see where it is plugged in. Pull the plug out and plug in something such as a light that you know should work. If the light doesn’t turn on, there is no power going to that outlet.
