Can an inground pool be filled in?
Backfilling a pool is the process of filling the empty space left by the inground pool with gravel, sand, or dirt. Backfilling is just one part of the pool removal process. The concrete floor and walls of the pool must be broken up and/or removed prior to backfilling.
Can you fill in an inground pool with dirt?
Regular fill dirt is preferred, but tailings are also an option. A good rule of thumb is ordering 80% fill/tailings, and 20% topsoil for the surface. This allows you to fill the hole within inches of the surface before applying the topsoil.
How much does it cost to fill an inground pool with water?
Below is a chart based on a water cost of $9 for every 1000 gallons of water it requires to fill your pool….Determine Cost.
| Gallons Of Water | Cost To Fill With Water |
|---|---|
| 5,000 | $45 |
| 10,000 | $90 |
| 15,000 | $135 |
| 20,000 | $180 |
Is filling in a pool expensive?
Cost to Fill in a Pool The average price to remove a swimming pool falls between $3,000 and $10,000. The cost to eliminate an above ground model averages $2,700. An inground unit can be extracted for $9,000 to $19,000 or filled in for about $5,000.
How much does it cost to restore a filled in pool?
The national average cost of resurfacing a pool is $6,500, and ranges from $1,000 to $100,000, including materials and labor. Labor charges vary from $45 to $65 an hour depending on the work involved and the location of the project.
Can you rehab a filled in pool?
Yes, it is possible to “restore” a filled in pool. And, for those interested, a good liner company can produce a liner to fit practically any pool design and shape.
Can you build over a filled in pool?
They have to be fully removed and then filled in with proper material. Full removal is required if you plan to build over it. Pools are not structural and cannot support the weight of a building over them when buried.
Can you restore a filled in pool?
Can I resurface my pool myself?
If your pool liner color is looking faded or stained, you may want to consider pool resurfacing. Depending on the type of inground pool you have, such as concrete or fiberglass, resurfacing might be a project you can DIY.
How do I permanently close my inground pool?
Use a jackhammer, sledgehammer, or other tool to smash holes into the bottom of the pool. This will allow water to drain out of it in the future. Remove any top decking concrete walkways, coping tiles and any other concrete around the pool that you don’t want anymore. Toss it into the pool over the holes you have made.
What can you do with a filled in pool?
5 Creative Ways to Fill the Pool
- Turn Your Pool Into a Deck. You don’t have to bring in the jackhammers and dirt to fill in your pool if you transform it into a deck.
- Turn Your Pool Into a Pond.
- Turn Your Pool Into a Greenhouse.
- Turn Your Pool Into a Garden.
- Turn Your Pool Into a Sunken Patio.
Should we fill in our pool?
A well-maintained swimming pool that does not have any leaks should not have to be drained or refilled every year—even every two or three years.
